SYNBON Automatic cement wall Plastering SYW-8

LEAVE MESSAGE

 // 

LOCATION : PRODUCTS - COMPACTION - UTILITY
PRODUCTS

Rendering Thickness: 5mm-30mm

Rendering Width: 1.0m

Rendering Speed:  500m²/day

Rendering Height: 2.6m-6.0m

Hopper Capacity:  100 liters

Dimension: 1200*550*650mm

              

Condition:

1. Applied wall: AAC block, Concrete and/or Solid Block, CMU hollow block, Baking-free brick, Roller compacted concrete (RCC), red brick, etc.

2. Applied mortar: Cement mortar, Lime mortar, Thermal mortar, Dry-mix mortar, Pre-mix mortar, Ordinary Portland Cement (OPC), etc.

Automatic Wall Rendering Machine Wall Plastering Machine Wall

20180910152728188.png@!w800

 The quality is subject to international wall plastering standard.

Very easy and simple to operation.

 Saving more than 20% raw material (cement &sand).

It can plaster the wall automatically and go up and down automatically.




  • Benefits & Features

    1. New Aluminum Magnesium Alloy main unit and directional pipes, supplied by China famous aluminum supplier Feng LV, lighter weight and higher strength.

    2. Original gear rack driving system enable output of main power more peaceful and stable, 25% faster lifting speed than old generation, improve the plastering efficiency.

    3. Plaster as much as 2.5m2 in about 45 seconds. More efficiently.

    4. Auto Positioning System device (APS) which guarantees a perfect and fully automatic alignment, even coating thickness, and wall flatness, more precisely.

    5. Remote Control available, easily and safely operate the machine from distance if desired.

    6. The directional poles are foldable so you can move the machine easily through any door passage and around the construction site.

    7. Feed cement mortar by dumper directly, which can save 2/3 of the time, improve the work efficiency.

    8. Enlarged mortar tank capacity to 100 liters, and enable to plaster wall surface of 4M without adding mortar anymore.

    9. Bigger accessible plastering wall surface, decrease the plastering surface to be with rectification by manual labor.

    10. Specially designed Plastering Height Control mechanism enables to plaster wall surface under beam, below and above window, corner.

     

    This machine is residential buildings, office building wall plaster equipment. This machine can plaster: cement walls, brick walls, hollow walls, brick-free brick, red brick, foam brick walls. Suitable ash are: white sand ash, cement ash, cement powder, dry mortar, dry mortar, stone powder, gypsum, white sand ash, foam mortar and so on.


    Package:

     reinforced wooden case

       Main unit wooden case: 135cm*94cm*92cm (L*W*H) Gross weight: 316kg

       Accessories wooden case: 259cm*30cm*24cm (L*W*H) Gross weight: 196kg

       Total 2 wooden cases: approx.1.35CBM, approx. 512kg

    SYW-8  1.png

    SYW-8  2.png

    SYW-8  3.png

    SYW-8  4.png

    SYW-8  5.png

    SYW-8  6.png


     

     

    This machine is residential buildings, office building wall plaster equipment. This machine can plaster: cement walls, brick walls, hollow walls, brick-free brick, red brick, foam brick walls. Suitable ash are: white sand ash, cement ash, cement powder, dry mortar, dry mortar, stone powder, gypsum, white sand ash, foam mortar and so on.


  • ModelSYW-8
    Rendering Thickness:5mm-30mm
    Rendering Width:1.0m
    BrandSYNBON
    Rendering Speed: 500m²/day
    Rendering Height: 2.6m-6.0m
    Hopper Capacity: 100 liters
    Dimension:1200*550*650mm
    Weight:140kg (main unit)
    Electricity Phase:Three Phase / Single Phase (optional)
    Voltage:380v/220v (optional)
    Power:1.1kw